Switches
CONTURA ROCKER SWITCHES By Carlingswitch U.S.A.
SPECIFICATIONS
- 20 amps 4 -14 v DC
- 16 amps 15 -28 v DC
- Front panel sealed to IP67/68 certification
- Illumination via 100,000 hour rated LED,s
- Rocker mechanism temperature range -40º to + 85º C.
- Endurance 150,000 cycles minimum
- A large range of printed Actuators are available
|
|
|
| PART NO | SWITCHING | CIRCUIT | VOLTAGE | ILLUMM |
| RSC102V | ON/OFF/ON | SP/DT | 12/24V | |
| RSC102V-12RR | ON/OFF/ON | SP/DT | 12V | 2 x RED |
| RSC102V-24RR | ON/OFF/ON | SP/DT | 24V | 2 x RED |
| RSC302V | ON/OFF/ON | DP/DT | 12/24V | |
| RSC402V | ON/ON | DP/DT | 12/24V | |
| RSC403V | ON/OFF | SP/ST | 12/24V | |
| RSC403V-12A | ON/OFF | SP/ST | 12V | AMBER |
| RSC403V-12G | ON/OFF | SP/ST | 12V | GREEN |
| RSC403V-12R | ON/OFF | SP/DT | 12V | RED |
| RSC403V-24R | ON/OFF | SP/ST | 24V | RED |
| RSC404V | ON/OFF | DP/ST | 12/24V | |
| RSC404V-12R | ON/OFF | DP/ST | 12V | RED |
| RSC404V-24R | ON/OFF | DP/ST | 24V | RED |
| RSC508V | OFF/ON | SP/ST | 12/24V | |
CONTURA ROCKER SWITCH ACCESSORIES
CONNECTOR HOUSING-Part No. VCH
Provides a professional wiring assembly allowing the wiring loom to be quickly released and attached to the switch. Location lug ensures correct alignment. Use with female spade terminal Part No.'s ,604502BL2 3-4mm Wire ,604501BL2 5-6mm Wire
|
|
|
|
CONTURA MOUNTING PANELS
Designed to enable the installer to professionally create a switch panel. The combination of End and middle sections enables the construction of multi switch panels with an Original Equipment appearance.VMM,VME,VMS
|
|
|
|
VRT
Actuator removal tool, used for removing front panel from switches
VMS
Single mounting panel used for replacing larger body rocker switches.
|
|
|
Actuators are available in a number of Pad Printed Options
Below is some of the Symbols available with suggested uses.
( Other symbols can be printed dependant on quantity )
|
| Head Lights | Interior Light | Fan or Blower | Auxiliary |
| Head Lights | Search Light | Horn | Arrow Left |
| Rear Fog Light | Beacon | Air Conditioner | Right |
| Driving Light | Hazard Lights | Auxiliary Fuel | Up |
| Work Light | Washer Wiper | Differential Lock | Down |
| Work Lights | Wiper | Air Filter | |
|
|
TOGGLE SWITCHES By Carlingswitch U.S.A.
SPECIFICATIONS
- 20 amps 4 -14v DC
- 16 amps 15-28v DC
- Blade or screw terminals
- Single and Double Pole Circuits
- Slow make, slow break contact mechanism
- Dielectric Strength 1.000v (minimum)
- Insulation Resistance 100 Megohms (minimum)
- Base material: Phenolic
- Actuator Material: Brass/Nickel Plate
- Bushing Material: Brass/Nickel Plate
| PART NO | SWITCHING | CIRCUIT | TERMINAL |
| TS101A | ON/OFF/ON | SP/DT | SCREW |
| TS101E | ON/OFF/ON | SP/DT | BLADE |
| TS102A | ON/OFF/ON | DP/DT | SCREW |
| TS102E | ON/OFF/ON | DP/DT | BLADE |
| TS301A | ON/OFF/ON | SP/DT | SCREW |
| TS301E | ON/OFF/ON | SP/DT | BLADE |
| TS302A | ON/OFF/ON | DP/DT | SCREW |
| TS302E | ON/OFF/ON | DP/DT | BLADE |
| TS401A | ON/ON | SP/DT | SCREW |
| TS401E | ON/ON | SP/DT | BLADE |
| TS402A | ON/ON | DP/DT | SCREW |
| TS403A | ON/OFF | SP/ST | SCREW |
| TS403E | ON/OFF | SP/ST | BLADE |
| TS404A | ON/OFF | DP/ST | SCREW |
| TS404E | ON/OFF | DP/ST | BLADE |
| TS501E | ON>ON | SP/DT | BLADE |
| TS502E | ON>ON | DP/DT | BLADE |
| TS508A | OFF/ON | SP/ST | SCREW |
| TS509E | OFF>ON | DP/ST | BLADE |
| TS510S | OFF/ON | DP/ST | SOLDER |
|
|
TOGGLE SWITCH ACCESSORIES
|
WATERPROOF COVER - HIGH QUALITY Part No. SW.TS1
- Brass nut screws over toggle switch
- Manufactured from Silicone Rubber
- Temperature Range - -82ºC - +260ºC
- Mil Spec MIL-B-5423C
|
|
WATERPROOF COVER - ECONOMY Part No. SW.M331B
- Screw base fits over toggle switch
- Manufactured from black rubber
|
EMERGENCY COVER - Part No. 8497K1
- Enables quick visual recognition and action to shut off important functions.
- Provides double action to engage function.
- Provides an Aircraft appearance to switch panels.
- Safety Red in colour
|
 |
SWITCH MOUNT PANEL SINGLE Part No. SW.SH084
- Allows mounting of a single switch under dash etc.
- Black in colour
- Location tang to secure switch in orientation.
- 2 mounting holes, for screws or rivets.
|
|
