Australian Arrow Boards

We have designed and developed our range of Flashing Arrow Boards to be the best in their class.

In developing this range of boards, we used our experience from our previous class leading Incandescent Light Arrow Boards and customer feedback, to develop what we consider to be the best featured unit in the marketplace.

Features

Warranty

  • 5 years on LEDs
  • 2 years on all other components

Small switch panel

  • Single Switch Panel
  • Double Switch Panel
  • Beacon switch included on switch panel
  • Arrow display on switch panel

Built in fault warnings

  • Lamp failure
  • Tilt mechanism failure
  • Voltage too high or low
Accordion Content
  • Auto Dimming
  • Sign board case constructed from 2mm Aluminium, reducing weight and providing long life
  • All Boards have 2 internal braces, providing strength and ensuring all internal cables are supported and secured
  • Easy wiring, all boards have a ‘Fly Lead’ cable with 4 Deutsch Plugs
    • Actuator for tilt assembly – Just plug in
    • Control Cable from Sign to Switch Panel – Just plug in
    • Power Lead, connect to power supply – Just plug in
    • Beacons – Deutsch plug, pins and instructions to connect beacon wires and then – Just plug in
  • Sign Board Case has 5 x 8mm inserts on each side for easy mounting – Stainless Bolts Supplied
  • Tilt Mount rack option, complete with Gas Strut on one side
  • Electric actuator option
  • Vertical lift rack option

When you order an ‘Australian Arrow Board’ it comes complete with:

  • Sign Board
  • Switch Panel
  • Switch Panel Pedestal Bracket
  • Fuse Box complete with Arrow Board and beacon circuit Fuses
  • Control cable 15M
  • Power cable 10M
  • Mounting bolts x 10

RMS ITS-TAN Certified

Our A and B size Arrow Board panels have been tested and approved to NSW RMS Specification ITS-TAN.

The Testing

Australian Arrow Boards have been designed and built to fully comply with Australian Standards AS4192:2015 and  have undergone rigorous testing to back this up, including:

  • Wind Rating Test
  • EMC Test
  • IP65 Test on LED Light assembly
  • LED Light output test
  • Environmental Tests – including; temperature test range from -20 to +60deg.C and IP45 test on the sign board
  • Testing by the N.S.W. Roads and Maritime Services
  • The A and B Boards as a result of the above are N.S.W. RMS ITS-TAN Type Approved
  • A Board Certificate No. ITS-TAN000044
  • B Board Certificate No. ITS-TAN000045
  • Their is currently no NSW RMS certification for C sized Boards. However, we have built them to our excellent standards of our A and B sized boards.

Not only have our A and B sized boards been built to conform to the NSW RMS ITS-TAN standards, they have also been tested by the RMS and certified to their ITS-RAN standards.

Before making a decision on your choice of an Arrow Board, ask if it has undergone rigorous testing and been properly certified to one of the available certifications.

Flash Patterns

Flashing Arrow Left

arrow board pointing left
arrow board without any pattern flashing

Flashing Double Arrows

arrow board flashing both directions
arrow board without any pattern flashing

Hazard / Caution (Alternates)

arrow board flashing hazard pattern
arrow board flashing hazard pattern

Flashing Arrow Right

arrow board pointing right
arrow board without any pattern flashing

Mounting Options

AAB-CCHAS-KIT
rack-aab-R0040-etched-web
Accordion Content
  • TA4-12V – Standard actuator 12 volt.
  • TA4-24V – Standard actuator 24 volt.
  • TA1-2415-001-24V – 800mm actuator stroke 24 volt.
Accordion Content

The AAB-CCHAS-KIT Cab Tray Mount is suitable for use with ute and truck allow trays.  The mount features telescopic struts to manually raise or lower the position of the mounted Arrow Board.

Accordion Content
  • Part number AAB-R0040
  • B Size Arrow Board mounting rack with gas strut and beacon mounting plates
  • Actuator sold separately
Accordion Content
  • Part number AAB-R0050
  • A Size Arrow Board mounting rack with gas strut and beacon mounting plates
  • Actuator sold separately
AAB-RAMB-B
AAB-RAMB-A-2
Accordion Content
  • Part number AAB-RAMB-B
  • B Size Arrow Board Mounting Bracket Pair
Accordion Content
  • Part number AAB-RAMB-A
  • A Size Arrow Board Mounting Bracket Pair

Small LED Arrow Sign

Australian Arrowboards amber flashing arrow sign traffic control

Our AAB-40 is the solution when a small sized arrow at an economical price is required. This unit benefits from the technology used in our full sized Flashing Arrow Signs. The same switch panel and main control unit is utilised.

The AAB-40 is a compact unit with a length of 1200mm with the height of 450mm across the head of the arrow.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
  • Small switch panel
  • Beacon switch included on switch panel
  • Arrow display on switch panel
  • Built in fault warnings, including:
    • Lamp failure
    • Voltage too high or low
  • Auto Dimming
  • Sign board case constructed from 2mm Aluminium, reducing weight and providing long life
  • Rear panel covers the horizontal lights, providing a housing for the controls and wiring, and ensuring a tidy look from the rear
  • The cover allows multiple fitting options for installing the unit
  • Easy wiring, all boards have a ‘Fly Lead’ cable with 3 Deutsch Plugs:
    • Control Cable from Sign to Switch Panel – Just plug in
    • Power Lead connects to power supply – Just plug in
    • Beacons – Deutsch plug, pins and instructions to connect beacon wires and then – Just plug in

When you order an Australian Arrow Board AAB40 it comes complete with:

  • Sign Board
  • Switch Panel
  • Switch Panel Pedestal Bracket
  • Fuse Box complete with Arrow Board and Beacon circuit Fuses
  • Control Cable 10M
  • Power Cable 10M
      Note: There is no applicable Australian Standard or approvals for this product.

Enquire Now

Enquire Now

A Board - 13 Lamp

A Board Illustration

A Board SINGLE SIDED

13 Lamp
  • Single sided board, controller & harnesses
  • 12V
  • Max Current Draw 2.1 amps
  • 16.6 kg

A Board DOUBLE SIDED

13 Lamp
  • Double sided board, controller & harnesses
  • 12V
  • Max Current Draw 4.2 amps
  • 18.7 kg

B Board - 15 Lamp

B Board Illustration

B Board AAB-BB

15 Lamp
  • Single sided board, controller & harnesses
  • 12V
  • Max Current Draw 2.5 amps
  • 21.6 kg

B Board AAB-BB-DBL

15 Lamp
  • Double sided board, controller & harnesses
  • 12V
  • Max Current Draw 5.0 amps
  • 25.3 kg

C Board - 15/17 Lamp

C Board AAB-CB

15/17 Lamp
  • Single sided board, controller & harnesses
  • 12V
  • Max Current Draw 2.5 amps
  • 55 kg

Thank You!

We have received your message.
We will get back to you as soon as possible.